TWS HeaderTwister Header LowerHomeResourcesTestimonialsBuyContact


About

• What is TWISTER?

• How does TWISTER work?

• What cleaners can I use TWISTER with?

• What sort of warranty does TWISTER come with?

• What are the TWISTER end caps for?

• What is the 30° angled adaptor for?

• Why does the pool hose section that connects TWISTER to the skimmer box have to be 2 feet long?

• If I install TWISTER between my in-line leaf catcher and the cleaner as the instructions indicate, wouldn't debris flow through TWISTER and clog it?

• Where can I get TWISTER?

Top of page

 

What is Twister?

Problem: Many suction cleaners get stuck on corners, others constantly follow a repetitive pattern around the pool. Either way, you end up with a dirty pool.

Solution: Simply install Twister! It continually changes the direction of the hose,driving your pool cleaner out of awkward corners to ensure a constantly random and thorough cleaning pattern.

• Simple To Install, fits to your existing pool hose assembly.

• Compatible with all suction cleaners.

• Steers pool cleaner out of corners.

• Allows random, thorough pool cleaning.

• "Twin Track" continuous drive technology.

It's a new and revolutionary accessory that allows for your pool cleaner to take a random and thorough cleaning pattern throughout your swimming pool floor. Its power steering for your pool cleaner!

Top of page

 

How does Twister work?

As TWISTER is connected onto your hose line, it rotates and counter rotates the swimming pool hose at 350° at a rate of about 3 times an hour, not too fast to not tangle the hoses and not too slow to allow flowing movement. As this is done, the hose line tugs the cleaner and keeps it moving that way, giving the cleaner continuous movement throughout your pool.

Top of page

What cleaners can I use Twister with?

TWISTER can be used will all suction side cleaners such as...

AQUABOT
Mamba

DIRT DEVIL
D2500
HydroVac
Rogue

HAYWARD
Blu
DV5000
Pool Vac Classic / Ultra / XL
Navigator / Navigator Pro
Sun Ray
King Ray

POLARIS
ATV

POOLVERGNUGEN
Pool Cleaner

PENTAIR / STA-RITE
E-Z Vac
Kreepy Krauly Classic
Kreepy Krauly Great White
Kreepy Krauly Kruiser
Kreepy Krauly SandShark

ZODIAC / BARACUDA
G2
G3
G4
MX6
MX8
Ranger
T5 Duo
TR2D
Pacer
Wahoo
X7 Quattro

plus all other suction side cleaners in the market.

Top of page

What sort of warranty does TWISTER come with?

TWISTER is covered for 1 year from defects in parts and workmanship/labor. If you experience any troubles with TWISTER, feel free to contact us.

Top of page

What sort of warranty does TWISTER come with?

Every TWISTER sold and distributed in North America is packaged with two (2) end caps which are blue and two (2) inches in diameter. These end caps are to be applied onto the cut ends of your pool hose and are designed to protect those sections and to provide a finished look on your TWISER/hose assembly. Please refer to our installation instructions for proper procedure of use.

Top of page

What is the 30° angled adaptor for?

Every TWISTER is packaged with one (1) angled adaptor. This unit is designed to fit between your cleaner and the section of pool hose which would connect to the cleaner. The angled adaptor, once installed on a hose line with a TWISTER also installed and in operation, is intended to alter the thrust angle of your pool cleaner. In other words, the angled adaptor dramatically changes the direction which the cleaner is pointing. Please refer to our installation instructions for proper procedure of use and for a list of cleaners which the angled adaptor is not needed.

Top of page

Why does the pool hose section that connects TWISTER to the skimmer box have to be 2 feet long?

TWISTER needs to be completely submerged underwater for it to function properly. Years of research and development has shown that a length of hose longer than two feet between the skimmer and TWISTER would leave too much slack and run the risk of allowing TWISTER to lift over water level to draw in air. A length of hose shorter than 2 feet would be too stubby and would allow TWISTER to rise above water level, drawing in air. The 2 foot of hose rule is applied for this reason to ensure the best performance possible for TWISTER and your cleaner.

Top of page

If I install TWISTER between my in-line leaf catcher and the cleaner as the instructions indicate, wouldn't debris flow through TWISTER and clog it?

TWISTER has gone through years of development prior to release in North America, one of the considerations during development was regarding positioning of the leaf catcher. It was determined that if the leaf catcher was installed between TWISTER and the cleaner, then the leaf catcher may turn over and lose the contents and also be too much of a weight burden for TWISTER, affecting it's performance. Because of this, TWISTER was designed to take in whatever piece of debris the cleaner can take. Please refer to our troubleshooting page for further assistance.

Top of page

Where can I get TWISTER?

You may visit your local swimming pool accessory supplier or you can buy one through our Online Store.

Top of page